 |
 |
 |
|
| Maximum Size |
125” x 63” (XOX) and 74” x 63” (XO, OX) |
| Configurations |
XOX, XO, OX |
| Maximum Design Pressure |
Per Notice of Acceptance |
| Glass Thickness |
1/8”, 3/16”, 1/4” and 1/2” Insulated |
| Glass Components |
Per Notice of Acceptance |
| Muntin |
Profile Exterior/Flat Interior |
| Frame Color |
White,Bronze |
| Frame Depth |
1 7/8” |
| Miami-Dade County NOA |
Reference Below |
|
|
|
 |
Rolling window shall be 8500 Series as manufactured by Lawson Industries, Inc., Medley, Florida, USA and shall conform to AAMA/NWWDA 101/I.S.2.-97, for HS-R 50, A.A.M.A. 1302.5-76 for forced
entry resistance.
|
|
All window members shall be of commercial quality 6063 aluminum hardened to T5 and T6 temper. All frame members shall have a minimum dimension of 1 7/8”, cut and fabricated to form a tight butt or telescoped joint. All frame corners shall be joined by two #8 sheet metal screws. Vertical meeting rails shall be of tubular construction and attached to horizontals with one sheet metal screw per joint. Vent rails shall also be of tubular design and
contain integrally extruded pull rails. Vent lock rail shall be fitted with weathering bulb vinyl to seal vent to jamb of frame. Weathering at jamb shall also contain polypropylene pile with transparent vinyl fin. Each vent rail shall contain two 3”-long spring-loaded claw latches that engage with full- length jamb lip to provide positive, secure latching.
|
|
Exposed aluminum shall be coated with an
electrostatically applied organic finish, meeting
the performance requirements of A.A.M.A. 603.5
for pigmented coating. Coating shall have a
minimum of 1.0 mil dry film thickness in a white
or bronze color.
|
|
Sash shall roll on two .437 diameter brass rollers with stainless steel axles. Dual gated weep hole
baffles shall reduce “blow back” of water resulting from gusting winds. Vents can be removed from interior for glass cleaning when vent is in the unlocked position only.
|
|
When specified, tubular aluminum extruded exterior muntin and flat aluminum interior muntin shall
be applied to glass in multitude of standard and custom configurations.
|
|
Double weather stripping throughout unit shall
be water-resistant polypropylene pile and virgin PVC vinyl.
|
|
All half screens shall be of rolled aluminum tubular profile and can be applied from the interior without using tools. Screens shall be held firmly in place by integrally extruded stops in sill and meeting rail. Mesh fabric shall be 18” x 16” dark grey fiberglass. Mesh shall be resplindable with plastic material.
|
|
Performance data shall comply with Florida Building Code. Consult Lawson web site for specifics: www.lawsonwindows.com.
|
|
All frame and sash members shall accommodate glass in nominal thickness of 1/8”, 3/16”, 1/4”
or 1/2” insulated. Glass color shall be as specified.
|
|
All frame and sash members shall accommodate glass in nominal thickness of 1/8”, 3/16”, 1/4”
or 1/2” insulated. Glass color shall be as specified.
|
| |
|
|
|
Brass rollers with stainless axle for ease of operation.
Tubular extruded rails reduce bowing of panels.
Unique sill design is anchored with straps.
Single-plane weathering eliminates gaps that could permit
air leakage.
Jamb and vent lock stiles are both weathered to provide the
most efficient method of defense against air and water penetration.
Aluminum glazing bead provides a strong, clean and neat appearance.
Gated weep hole protective cover allows water to escape while
preventing insects from entering.
Profile aluminum extruded muntin matches the muntins of our
other products for visual appeal.
Frame depth is 1 7/8”, making it a practical depth to
match most commonly available buck sizes.
Colonial design featuring profile aluminum muntins on exterior
and flat applied muntin on interior.
|
|
|
